2 INTRODUCTION
0463 431 001
- 7 -
© ESAB AB 2016
2 INTRODUCTION
The Mig 4004i Pulse combined with U6 or U8
2
offer a complete multi-process package
supporting MMA, TIG, MIG/MAG and pulse MIG.
The power source is intended for use with the wire feed unit Aristo® Feed 3004/4804 or
Aristo® YardFeed 2000 and the cooling unit COOL 1. Aristo® Feed 3004/4804 is available
with two operational solutions, the Aristo® U6 panel and the Aristo® U8
2
pendant. Aristo®
YardFeed 2000 is available with the Aristo® U6 panel.
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1 Equipment
The power source is supplied with:
• 5 m return cable with earth clamp
• instruction manual for the welding power source
To Next Page
Loading...
