3
!WARNING!
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND
OTHERS. TAKE PRECAUTIONS WHEN WELDING. ASK FOR YOUR
EMPLOYER'S SAFETY PRACTICES WHICH SHOULD BE BASED ON
MANUFACTURER'S HAZARD DATA .
!ELECTRIC SHOCK - CAN KILL!
* Install and earth the welding or cutting equipment in accordance with applicable standards.
* Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
* Insulate yourself from earth and workpiece.
* Ensure that your working place is safe.
!FUMES AND GASES - CAN BE DANGEROUS TO HEALTH!
* Keep your head out of the fumes.
* Use ventilation, extraction of fumes at the arc or both to keep fumes and gases out of your
breathing zone and the general area.
!ARC RAYS - CAN INJURE EYES AND BURN SKIN!
* Protect your eyes and body. Use the correct welding screen and filter lens and wear
protective, insulating and non-flammable clothing.
* Protect bystanders with suitable screens or curtains.
!FIRE HAZARD!
* Sparks and spatters can cause fire. Make sure, that there is no inflammable material in the
surrounding of welding and cutting works.
!MALFUNCTION!
* Call for expert assistance in the event of malfunction.
Read and understand the instruction manual before installation and operation
!Protect yourself and others!
WARNING.doc
To Next Page
Loading...
