Need help?Do you have a question about the ESAB Tig 150i and is the answer not in the manual?
General| Output Current Range | 10 - 150 A |
|---|---|
| Cooling Method | Fan-cooled |
| Protection Class | IP23 |
| Welding Process | TIG, MMA |
| Open Circuit Voltage | 70 V |
| Input Voltage | 230 V |
Lists included items such as mains cable and instruction manual.
Details setting range and steps for various welding parameters.
Guidance on positioning the power source for proper cooling.
Information regarding the location of the machine's rating plate.
Instructions for mains connection and recommended fuse/cable sizes.
Identifies and explains various connections and controls on the welding unit.
Describes control panel functions, including LEDs, display, and knob.
Explains the thermal overload trip mechanism and its indicator lamp.
Guide to TIG welding operations, covering control modes and parameters like Gas post-flow, Slope down, and current.
Instructions for MMA welding, including electrode striking and technique.
Explains the built-in fault monitoring system and how fault codes are displayed.
To Next Page