ESAB Warrior Feed 304 - Installation; Professional Installation Requirement; Lifting and Mounting Safety

4 INSTALLATION
0463 363 101
- 11 -
© ESAB AB 2019
4 INSTALLATION
4.1 Overview
The installation must be carried out by a professional.
WARNING!
When welding in an environment with increased electrical danger, only power sources
intended for this environment may be used. These power sources are marked with the
symbol .
4.2 Lifting Instructions
CAUTION!
Risk of crushing when lifting the wire feeder. Mounting a large wire bobbin (Ø 440
mm), may change the centre of gravity of the wire feeder and increase the risk of
tipping and crushing. Protect yourself and warn bystanders of the risk.
CAUTION!
To avoid personal injury and / or equipment damage, lift using method and attachment
points shown here.
Ordering number for the lifting eye can be found in chapter "Order Number".
NOTE!
If another mounting device is used, this should be insulated from the wire feed unit.