ESAB Warrior Feed 304 - Ordering Spare Parts; Spare Parts Ordering and Compliance

7 ORDERING SPARE PARTS
0463 363 101
- 18 -
© ESAB AB 2019
7 ORDERING SPARE PARTS
CAUTION!
Repair and electrical work should be performed by an authorised ESAB service
technician. Use only ESAB original spare and wear parts.
The Warrior Feed 304 is designed and tested in accordance with international and
European standards IEC/EN60974-5 and IEC/EN60974-10 Class A, Canadian standard
CAN/CSA-E60974-5 and USstandardANSI/IEC 60974-5. On completion of service or
repair work, it is the responsibility of the person(s) performing the work to ensure that the
product still complies with the requirements of the above standards.
Spare parts and wear parts can be ordered through your nearest ESAB dealer, see
esab.com. When ordering, please state product type, serial number, designation and spare
part number in accordance with the spare parts list. This facilitates dispatch and ensures
correct delivery.