ESAB Warrior Feed 304 - Technical Data; Key Specifications

3 TECHNICAL DATA
0463 363 101
- 9 -
© ESAB AB 2019
3 TECHNICAL DATA
Warrior Feed 304, Warrior Feed 304w
Power Supply voltage 42 V AC, 50–60 Hz
Power requirement 252 VA
Rated supply current I
1
6 A
Settings data
Wire feed speed
Creep start
2/4 stroke
Wire selection
1.5–25.0 m/min (4.9–82 ft/min)
OFF or ON
2 stroke or 4 stroke
Solid or Cored
Torch connection EURO
Max. diameter wire bobbin 300 mm (*440 mm), 12 inch (*17 inch)
Wire dimension
Fe
SS
Al
Cored wire
0.6–1.6 mm (0.023 – 1/16 inch)
0.8–1.6 mm (0.030 – 1/16 inch)
1.0 & 1.6 mm (0.40 & 1/16 inch)
0.9–1.6 mm (0.035 – 1/16 inch)
Weight
WF 304 with bobbin cover
WF 304w with bobbin cover
14.4 kg (31.7 Ibs)
14.7 kg (32.4 Ibs)
Weight wire spool (ESAB standard)
Ø 200 mm
Ø 300 mm
Ø 440 mm
5 kg (11.0 lbs)
18 kg (39.7 lbs)
30 kg (66.1 lbs)
Dimensions (l × w × h)
basic

675×265×418mm (26.6×10.4×16.5
inch)
Operating temperature -10° to +40°C (+14° to +104°F)
Transport and storage temperature -20° to +55°C (-4° to +131°F)
Shielding gas
max pressure
All types intended for MIG/MAG welding
5 bar (0.5 Mpa)
Coolant(Warrior Feed 304w)
max pressure
ESAB's ready mixed coolant
5 bar (0.5 Mpa)
Permissible load at
60% duty cycle
100% duty cycle

500 A
400 A
Enclosure class
with the Ø 440 mm (Ø 17 inch) bobbin and/or
the counter balance device
IP23

IP2X
* See the "ACCESSORIES" chapter in the instruction manual.