To Next PageTo Next Page
Need help?Do you have a question about the Esco Lexicon and is the answer not in the manual?
Contact information for technical support and service for Esco products.
Details items and conditions not covered by the limited warranty.
Explains warranty coverage for factory-installed, customer-specified accessories.
Encourages registration and defines Esco's liability limits regarding warranties.
Identifies covered models and highlights critical safety instructions and potential hazards.
States user responsibility, liability limits, and compliance with EU WEEE/RoHS directives.
Overview of Lexicon ULT freezers, their features, and design priorities.
Identifies and explains the various labels found on the freezer unit.
Diagram and labels identifying key external components on the front of the freezer.
Diagram and labels identifying key external components on the back of the freezer.
Specifies requirements for the physical location and surrounding space for unit installation.
Details the necessary ambient conditions for optimal freezer operation.
Outlines the electrical specifications and outlet requirements for the freezer.
Instructions on how to properly level the freezer using its adjustable feet.
Procedure for installing or repositioning shelves within the freezer chamber.
Guidance on attaching Omega brackets for maintaining wall clearance.
Details on connecting external alarms to the freezer's alarm contacts.
Steps for connecting the power cord and installing the protection bracket.
Instructions for initial startup and operation after installation or relocation.
Notes that performance after transit and installation is not guaranteed; on-site testing is recommended.
Explains the function of the control panel, buttons, and LEDs.
Procedure for calibrating the control probe using a reference instrument.
Instructions on adjusting the target temperature and hysteresis settings.
Recommendations for loading products to maintain optimal temperature and performance.
Proper procedure for opening and closing the main and inner doors.
Information on how to lock the main door using the provided key set.
Details on setting and managing high/low temperature alarms and hysteresis.
Reference to power failure alarm details and switch operation.
Presents a schedule for routine maintenance tasks to ensure optimal performance.
Instructions for routine cleaning of the freezer surfaces.
Guidance on cleaning the condenser to maintain efficiency and prevent damage.
Procedure for inspecting and cleaning the air filters to protect the condenser.
Instructions for cleaning the door gasket to ensure a proper seal.
Procedure for cleaning the vacuum relief port to prevent frost build-up.
Steps for defrosting the unit and cleaning interior/exterior surfaces.
Instructions for checking the voltage of the Power Failure (PF) battery.
Steps to take when preparing the freezer for long-term storage.
Recommendation for maintaining a log of all maintenance and service activities.
Information on installing an LCO2/LN2 backup system for temperature maintenance.
Procedure for installing a chart recorder for independent temperature monitoring.
Addresses common problems like the unit not working or poor performance and their possible causes.
Diagrams and labels identifying the various parts of the freezer.
Table detailing the technical specifications of the Lexicon Ultra-Low Temperature Freezer.
Details the parameters available in the controller's menu (Code 72) for configuration.
Template for recording freezer operation, events, and maintenance activities.
General