Escort iLog User Manual

iLog User Guide
15
The third window is the ‘Configure Sensors – alarm’ window (see figure1.12). You can select a
series of different option relating to your sensor(s) alarm settings by selecting the corresponding
tick box. If you wish to alter the number of out of specification readings or consecutive readings
out of specification that a logger records before generating an alarm, simply select the
appropriate tick box and enter the required number into the text box provided or use the scrolling
arrows located to the right of the text box.
Figure 1.12 - ‘Configure Sensors – Alarm’ window
Change your alarm settings by applying the
required figures into the text boxes or using
the scrolling arrows located to the right

Escort iLog Specifications

General

Brand	Escort
Model	iLog
Category	Data Loggers
Language	English