Operation Operation
13 14
Ka Band On / Off* Covers frequency range: 33.400 – 36.000 GHz
NOTE: When Ka Band is off, Ka Narrow bands are available selections
Ka Narrow 1 On / Off* Covers frequency range: 33.400 – 33.700 GHz
Ka Narrow 2 On* / Off Covers frequency range: 33.700 – 33.900 GHz
Ka Narrow 3 On / Off* Covers frequency range: 33.900 – 34.200 GHz
Ka Narrow 4 On / Off* Covers frequency range: 34.200 – 34.600 GHz
Ka Narrow 5 On* / Off Covers frequency range: 34.600 – 34.800 GHz
Ka Narrow 6 On / Off* Covers frequency range: 34.800 – 35.160 GHz
Ka Narrow 7 On / Off* Covers frequency range: 35.160 – 35.400 GHz
Ka Narrow 8 On* / Off Covers frequency range: 35.400 – 35.600 GHz
Ka Narrow 9 On / Off* Covers frequency range: 35.600 – 35.840 GHz
Ka Narrow 10 On / Off* Covers frequency range: 35.840 – 36.000 GHz
Laser On* / Off Laser detection
TSR On* / Off Traffic Sensor Rejection (TSR) filtering
Exit Exit Band Enables menu
K Notch On / Off* Reduces sensitivity of K band frequency range:
24.190 – 24.210 GHz
NOTE: K Notch is effective at reducing alerts to certain vehicle
collision avoidance systems
Shifters Receive / Shift* / Shift4 / Shifter mode. Receive = receive-only
Shift6 / Shift8 / Shift10 / Off Shift4/6/8/10 puts shifters in receive-only mode after 4/6/8/10
seconds from receiving an alert
NOTE: only available when optional ZR5 or ZW5 shifters are connected
Marker Enable Default* Default Marker Enables
Modified Marker Enables have been modified from their default settings
Tones Standard* Standard alert tones
Standard+ Standard alert tones for primary alert plus a
double-beep tone for additional alerts
Mild Mild doorbell chime alert tones
AutoMute Low / Med* / High / Off During an alert, automatically reduces audio to selected
volume level
AutoLearn On* / Off Automatically stores and locks out false alerts
Units English* / Metric Units for distance and speed
Language English* / Español Language for voice and text
Voice On* / Off Voice announcements
GPS Filter On* / Off Enables GPS Filtering of stored false alerts
AutoPower Off / 1 Hour / 2 Hours / Powers down unit after specified time
4 Hours*/ 8 Hours NOTE: If AutoPower is enabled, to save screen life the display
screen goes blank after 30 minutes without moving. Display
screen will turn on automatically after you reach 10MPH
Band Enables Default* Default Band Enables
Modified Band Enables have been modified from their default settings
Repeatedly press BRT to cycle through Band Enables. Press + or – to change the selected Band Enable on or off
X Band On* / Off
K Band On* / Off Covers frequency range: 24.050 – 24.250 GHz
NOTE: When K Band is off, K Narrow bands are available selections
K Narrow 1 On* / Off Covers frequency range: 24.050 – 24.110 GHz
K Narrow 2 On* / Off Covers frequency range: 24.110 – 24.175 GHz
K Narrow 3 On* / Off Covers frequency range: 24.175 – 24.250 GHz
K Narrow 4 On / Off* Covers frequency range: 23.950 – 24.050 GHz
MultaRadar CD On / Off* MultaRadar CD detection
MultaRadar CT On / Off* MultaRadar CT detection
To Next Page
Loading...