Escort MAX 4 - Page 9

Operation
15 16
Operation
Display Color
The display graphics can be changed to blue, green, red or orange to match the instrument lighting
of your vehicle.
Speed Display
Turns Speed Display o or on. When Speed Display is o, the vehicle’s voltage is displayed.
Cruise Alert
While traveling below the set Cruise Alert speed, all alerts sound a short double beep. The alert will
fully sound when you exceed the Cruise Alert speed.
Over Speed
You can set the Over Speed alert to notify you when you are traveling over a specied speed. When
you travel above the speed that you have set, the background display for your current speed will turn
red and a voice prompt will announce “Over Speed”.
When connected to the Drive Smarter app, the Over Speed setting is automatically set to the speed
limit showing on the display. If no speed limit data is available and the display shows --, the Over
Speed setting is used.
Over Speed Limit
NOTE: this setting only applies when MAX 4 is connected to Bluetooth
®
with internet connectivity.
When the speed limit is exceeded by the set speed, the background for your current speed will
change to red and a voice prompt will announce “Over Speed”. If no speed limit data is available and
the display shows --, the Over Speed setting is used.
Meter Mode
MAX 4 oers ve dierent settings for displaying information about alerts.
Serial Number and Software Version
To view your MAX 4’s serial number and software revision, press and hold the MRK and MUTE
buttons while powering on the detector.
User Mode
Advanced Access and customize all settings and preferences.
Novice Access and customize only Units (English or metric) and Display
Color. All other preferences are set to factory defaults. To view all
settings and preferences, you must switch to Advanced mode.
Repeatedly press BRT to cycle through Marker Enables. Press + or – to change the selected Marker Enable on or off
Other On* / Off Other location
Red light On* / Off Red light camera
Red & Speed On* / Off Red light and speed camera
Speed Camera On* / Off Speed camera
Speed Trap On* / Off Speed trap
Air Patrol On / Off* Aircraft enforcement areas
Exit Exit Marker Enables menu
Clear Location Marked* Clear all user marked locations
Lockouts Clear all locked out false alerts
Defender Clear all Defender locations
Format Clears all locations
Press BRT twice to confirm selection
Interface Mode 1* / Mode 2 Default is "Mode 1"
Auto Update Off / Database/ Automatically checks for the selected updates when
Firmware/All* connected to aWi-Fi hotspot
WiFi Update Database/Firmware Perform an update to the selected software