Escort MAX Series - Display Customization; Speed Alert Settings

Operation
17 18
Operation
Serial Number and Software Version
To view your MAX 360c MKII’s serial number and software revision, press and hold the MRK and MUTE
buttons while powering on the detector.
User Mode
Advanced Access and customize all settings and preferences.
Novice Access and customize only Units (English or metric) and Display Color. All other
preferences are set to factory defaults. To view all settings and preferences, you
must switch to Advanced mode.
Other On* / Off Other location
Red light On* / Off Red light camera
Red & Speed On* / Off Red light and speed camera
Speed Camera On* / Off Speed camera
Speed Trap On* / Off Speed trap
Air Patrol On / Off* Aircraft enforcement areas
Exit Exit Marker Enables menu
Clear Location Marked Clear all user marked locations
Lockouts Clear all locked out false alerts
Defender Clear all Defender locations
Format Clears all locations
Press BRT twice to conrm selection
Wi-Fi
On* / Off Allows connection to a Wi-Fi hotspot
Bluetooth
On* / Off Allows connection to the Drive Smarter app
Auto Update Off / Database/ Automatically checks for the selected updates when
Firmware/All* connected to aWi-Fi hotspot
WiFi Update Database/Firmware Perform an update to the selected software
Interface
Mode 1* Supports accessories including ZR5 and ZW5
Mode 2 Supports aftermarket accessories
Arrow Mode
Single Arrows are displayed indicating the direction of only the primary threat. All arrows use
your selected display color.
Multiple Threat-direction arrows are displayed for multiple threats. When multiple threats are
displayed, the direction arrow of the primary threat will blink.
Band Threat-direction arrows are color-coded for the band that is being detected. When
multiple threats are displayed, the direction arrow of the primary threat will blink.
X band = green, K band = blue, Ka band and Laser = red
Display Color
The display graphics can be changed to blue, green, red or orange to match the instrument lighting of
your vehicle.
Speed Display
Turns Speed Display off or on. When Speed Display is off, the vehicle’s voltage is displayed.
Cruise Alert
While traveling below the set Cruise Alert speed, all alerts sound a short double beep. The alert will fully
sound when you exceed the Cruise Alert speed.
Over Speed
You can set the Over Speed alert to notify you when you are traveling over a specified speed. When you
travel above the speed that you have set, the background display for your current speed will turn red and
a voice prompt will announce “Over Speed”.
When connected to the Drive Smarter app or a mobile Wi-Fi hotspot, the Over Speed setting is
automatically set to the speed limit showing on the display. If no speed limit data is available and the
display shows --, the Over Speed setting is used.
Over Speed Limit
Note: this setting only applies when MAX 360c MKII is connected to a Wi-Fi hotspot with internet
connectivity.
When the speed limit is exceeded by the set speed, the background for your current
speed will change to red and a voice prompt will announce “Over Speed”. If no
speed limit data is available and the display shows --, the Over Speed setting is used.