F7F Tigercat
Specification:
Length :1840 mm(72.4")
Wing Span :2105 mm(82.9")
Wing Area :60.98 sq. dm
6.56 sq. ft
Wing Loading :172.2 g/sq. dm
56.5 oz/sq. ft
Flying Weight :10.5 kg(23.2 lbs)
Radio :6ch&13 servos
Engine :70 2-cycle
91 4-cycle
SAFETY PRECAUTIONS
INSTRUCTION MANUAL
First-time builders should seek advice from people having building
experience.If misused or abused,it can cause serious bodily injury
and damage to property.
Fly only in open areas and preferably at a dedicated R/C flying site.
We suggest having a qualified instructor carefully inspect your
airplane before its first flight.Please carefully read and follow all
instructions included with this airplane,your radio control system
and any other components purchased separately.
(The people under 18 years old is forbidden from flying this model)
This R/C airplane is not a toy!
(Option accessories)
3-way
pressure inlet
Air tank
3-way
pressure inlet
3-way
pressure inlet
3-way
pressure inlet
3-way
pressure inlet
Switch
Air inlet
Quick release connector
Make sure to assemble retracts as instructed below.
Three wheel retract system
Quick release connector
Pressure reduction inlet
Ø1.7mm
Ø0.2mm
Pleas notice the inner diameter
of each side the pressure reduction inlet.
Please insure the sealing of the air switch
system before flight .
The status when the
gear door closed.
Pull out length of 8mm
to make gear door open.
Air valve
Air valve
3-way pressure inlet
5
1
Air tank
1
Air inlet
1
1
Air line (3000mm)
2
Quick release connector
Switch
Clevis
Rod (2X300mm)
1
1
1
Retainer
TP Screw(2.6x14mm)
2
3
Air switch
Air switch
Air switch
Air switch
To Next Page
Need help?
General