11
English
Names and functions of parts
A POWER button
Press to turn the unit on and off.
When the unit is on, the ring around the button lights.
When the unit is off, it is unlit.
When not using the unit, turn it off.
B CLOCK indicator
This shows the clock synchronization status.
This indicator blinks during clock synchronization and lights
when synchronization completes.
C USB drive port ( )
Connect USB flash drives that contain audio files here.
o To play audio files on a USB flash drive connected to a USB
DRIVE port, set the input source to NET and use an app for
playback (page10).
D Remote control signal receiver
This receives signals from the remote control. When using the
remote control, point the end of it toward this receiver panel.
o This product does not include a remote control.
o The dimmer of this unit can be adjusted using a remote control
included with another ESOTERIC product.
E Display
This shows various information, including the sampling frequency
of the input source.
F INPUT button
Press to change the digital input. Select a connector that has a
digital device connected. If no digital signal is being input, the
display will blink.
G MENU button
Press to enter setting mode.
H Setting adjustment (l/;) buttons
Use to change parameters when in setting mode.
When NET is selected, these can be used to play and skip tracks
in the playlist.
o You cannot change the volume with this unit.
To Next Page
Loading...
Need help?
General
