18
D/A converter operation setting
PCMM>***
The D/A converter operation mode used during PCM playback can
be set to three types: M1, M2 or M3.
This changes the ΔΣ modulator operation frequency and randomiza-
tion algorithm used to absorb hardware error.
M1 is the ESOTERIC reference mode.
The operation frequency of the ΔΣ modulator becomes progressively
lower in order from M1 to M2 to M3.
The replacement amount of the randomization algorithm increases
progressively in order from M1 to M2 to M3.
Select the sound setting you prefer.
o By default, the setting is M1.
DSD filter setting
DSDF>***
Use to set the digital filter during DSD playback.
Set it as desired.
o By default, the setting is OFF.
OFF
No digital filter is used.
F1, F2, F3
A digital filter is used. F1, F2 and F3 are digital filters with different
frequency responses. The cutoff frequency becomes progressively
lower from F1 to F2 to F3.
Settings 2
Automatic power saving setting
APS>***
If there is no input from the selected input source for the set time, the
power will turn off automatically.
o By default, the setting is 30m.
o The input sources that are not selected have no effect on auto-
matic power saving.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
Settings 1 (continued)
To Next Page
Loading...
Need help?
General
