8
How to Change the Programming Pin Number
1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press
*
key followed by the 3 key the orange LED will start to
flash.
3. Enter the new programming pin twice.
A conformation bleep will be heard.
How to delete all pin numbers
1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press
*
key followed by the 8 key the orange LED will start to
flash.
3. Press the 8 key twice.
7 conformation bleeps will sound.
Deleting a Pin number from Zone1
1. Enter programming mode
A Long bleep will be heard and the green power LED will turn orange.
2. Enter the location number of the pin number/tag you wish to delete
using a 3 digit format (xxx).
The red LED will illuminate.
3. Press the star * key twice.
The LED will now turn green.
Deleting a Pin number from Zone2
1. Enter programming mode
A Long bleep will be heard and the green power LED will turn orange.
2. Press the * key followed by the 4 key
The orange LED will start to flash
3. Enter the location number of the pin number/tag you wish to delete
using a 2 digit format (xx).
The red LED will illuminate.
4. Press the star *key twice.
The LED will now turn green.
EZ-LOCK Manual_Layout 5 04/04/2013 14:53 Page 8
To Next Page
Loading...