ESPEC EHS-211M - To Monitor 0.1 Hour Timer Time; To Monitor Auto Start Timer Information

Chapter 3 Commands
■To Monitor Auto Start Timer Information
Table 3.19 Auto start timer information monitor command
Monitor command
Address
Main
command
Optional
parameter
Description/Example command/Response format/Example
response
＜
Description
＞
This command requests the chamber to return the auto start time
setting and the time remaining till operations start.
＜
Example command
＞
“1,ATIME?”
＜
Response format
＞
“set time,remaining time”
1 to 16 ATIME?
−
＜
Example response
＞
“10.0,10.0”
■To Monitor 0.1 Hour Timer Time
Table 3.20 0.1 hour timer time monitor command
Monitor command
Address
Main
command
Optional
parameter
Description/Example command/Response format/Example
response
＜
Description
＞
This command requests the chamber to return the time of the 0.1
hour timer.
Counted in 3-sec intervals from 1 to 120.
＜
Example command
＞
“1,TIMEL?”
＜
Response format
＞
“time remaining under 0.1 hour”
1 to 16 TIMEL?
−
＜
Example response
＞
“120”
29