ESPO PATH SLIDE PRINTER - Connectivity and Peripherals; Interface Settings

28
Setting of interface
[1] USB ID
The initial value of USB ID is set to “1”.
[2] Port No. of network
Interface Printer driver
Command (bidirectional
mode)
Command (simplex
mode)
LAN
Protocol RAW
Port TCP9100
Port TCP 51000 Port TCP 51000
Wireless LAN
Protocol RAW
Port TCP9100
Port TCP 51000 Port TCP 51000
[3] MAC address
You can check the MAC address on the Interface Setting screen.
※ Some old firmware is displayed on the back panel interface connector section.
LAN Wireless LAN