ESS DS200 - Appendix B: Collapsible Ballot Box (continued); Disassembling the Ballot Box

Disassembling the Ballot Box
Power down and unplug the scanner from power.
Pull the scanner forward and detach the power
connection.
Unlock the ballot box lid and set aside. Remove
auxiliary bin partition and ballot box walls.
Fold the walls back into the base and place the
partition on top of them.
Place ballot box key inside the compartment and
the lock the lid back into place. Wind the cord
around the handles on top of the lid.
Store according to your jurisdictions requirements.
Appendix B: Collapsile Ballot Box
(continued)
DS200 Digital Precinct Scanner | EVS 6.0.2.1 | Poll Worker Guide v 1.1.CBB
Page | 15