ESS GPS-5 - Before Use Checks

7
ESS GPS-5 OWNER’S MANUAL
Before use
The engine and the air compressor have been lled with the proper
lubricant at the factory. However, their lubricant levels must be
checked before the GPS-5 is operated. If they need to be replenished,
use 30 weight compressor oil in the compressor and 10W-30 oil in the
engine. Fill the gasoline engine tank with unleaded gasoline.
Please consult the Briggs and Stratton
gasoline engine manual for detailed
instructions on
operating and
maintaining
of the engine.
The Tank Pressure Regulator
controls the pressure in the
tank. Set the tank pressure to
12-15 PSI.
Check the compressor
oil level before each
spray application.
Visually check the gasoline tank fuel
level before each spray application.
Check the engine
oil level before each
spray application.
To check the engine oil level, unscrew the yellow
plastic plug. Oil level should be up to the lip of the
ll hole.
To check the compressor oil, remove the 7/16”
plug. Oil level should be up to the lip of the hole.