Measuring
5
1 Position your patient in front of the Visioffice,
roughly 30 in from the mirror with their feet and
shoulders squarely facing the unit.
2 Select the Measuring Tab at the top of the screen.
3 Press the Camera icon to select the Far Vision
Measurement.
4 Adjust the patient’s distance from the Visioffice,
using the tracking detector until an acceptable
distance is achieved.
5 Raise or lower the Camera to patient’s eye level.
6 Position the Upper Frame Clip Marker on a
horizontal line with the LE and RE references,
ensuring detection of all green trackers.
7 Verify that the Frame Clip is still centered on
the frame and that the Frame Adjustment is still
comfortable for the patient.
Patient Positioning
Correct Not Correct
You can now begin the Measurements
7
!
With Visioffice Table Top, use a rotating stool without
seatback or arms. Rotate the stool for position
adjustments, then block during measurement recording.
4
5
6
3
1. Static Front View
2. Rotational Three-Quarter View
To Next Page
Loading...
Need help?
General
