Need help?Do you have a question about the Essilor ALM 700 and is the answer not in the manual?
General| Type | Automatic Lensmeter |
|---|---|
| Measuring range sphere | -25.00D to +25.00D |
| Measuring range axis | 0° ~ 180° |
| Measuring range prism | 0 to ±10.00Δ |
| Measuring modes | Progressive |
| Lens diameter | Up to 100mm |
| Power supply | AC 100~240V 50/60Hz |
| Measurement Steps | 0.01D (Sphere & Cylinder), 1° (Axis) |
| Prism Steps | 0.01Δ |
Provides warnings and guidelines on device usage, environment, and handling.
Identifies and labels all physical components of the ALM 700 device.
Details initial setup procedures, including device settings and data configuration.
Essential checks and pre-operation preparations before starting lens measurements.
Step-by-step guide for accurately measuring single vision lenses.
Instructions for measuring prescription values of lenses fitted within frames.
Details how to set up and perform pupillary distance measurements.
Guide for measuring the different optical zones of multifocal lenses.
Instructions for accurately measuring progressive lenses with varying prescriptions.
Covers setting up and performing UV transmission measurements on lenses.
Procedures for preparing and measuring contact lenses.
Provides steps to resolve specific error messages and general troubleshooting.
To Next Page
