Essilor ALM 700 - 8 Other Functions; Auto Memory Function; Operation Procedure

36
8. Other Functions
8.1 Auto Memory Function
This device has the function to store the measurement values in memory automatically when
the alignment is achieved, and the message “Marking OK” is displayed at the time of the
measurements of single focal lens, multifocal lens and contact lens.
8.1.1 Operation Procedure
Move the cursor to “Auto Memory” with or
and select “On” with .
Return to the measurement switch with
after the settings or changes are completed.
he measurement values are stored in memory
automatically when the message “Marking OK”
appears after the alignment mark and cross cursor
overlap as shown on the right.
+2.50
A
lignment
mark
Cross cursor