Getting Start
of enrollment, verification, and identification
tasks.
Operational trip：
In the initial interface, enter your ID number, the following
appears:
Note： This fingerprint machine default enrolling number is 5
digit, if you enrolled number does not arrive 5 digit, the
machine will add 0 in front of this figure , E.g. your number is
11, the 00011 will be displayed in the machine.
Press “OK”, then Place the finger on the sensor surface, the
following appears：
It continues for about 0.5 seconds. If the test is successful, it will
say “Thank you”, the following appears:：
1：1 FP Verify
Enroll No 00011
ESC OK[Pwd]
1：1 FP Verify
Please Move Finger
FP Verify
Enroll No 00001
Verified！
To Next Page
Loading...
