Option
n Clear all Data: delete all enrolling user information and logs.
n Delete Logs: delete all logs of flash disk.
n Clear Admin’ Privilege: change the Administer privilege into
ordinary users’ option.
n Show Score: whether show the quality value of fingerprint in
the screen or not.
n Threshold: For helping in selecting threshold level settings,
see Table 1--1
n Only 1 to 1: whether the staff`s ID number must be input.
n 1:1 Threshold: when use ID+ fingerprint to verify set the
Threshold level
n Two Sensors: if need to connect a external additional Sensor,
choose the option as “Yes”
Note: After connect with fingerprint sensor; be sure to
restart the fingerprint machine, so the sensor takes effect.
n Sound: whether use to phonic hint or not. If set the option as
(Yes), the machine will send a hint sound for every operation
example, after the verification is successful, the machine will
say (Thank you), if set the option as (No) the machine will
not send sound Hint, only utter one (do) sound after the
verification is positive, when the verification is negative, the
machine utter two (do).
To Next Page
Loading...
