TROUBLESHOOTING
Issue Cause Solution
The machine won’t start
The machine is not plugged in or
connected to a source of power
Check the general switch, the plug, and the
feeding cable
The voltage input is incorrect Use the proper voltage
There is another issue with the
machine
Stop using the machine immediately and
contact the manufacturer for assistance
The machine causes an
electric shock
Wires are touching the structure
of the machine
Check the wires, conrming that they are
not touching the structure of the machine
Only one set of rollers
is working
The belt is broken Change the belt
The worm wheel is worn out Change the worm wheel
The machine is making a
loud noise
Lubrication needed Check all lubrication points and add
Loose chain
Check that the transmission chain is
connected. Replace if damaged
Worn out bearings
Check machine bearings for any wear/tear.
Replace if damaged
7.
ITEM # COMPATIBLE ITEM # PART DIAGRAM #
348PDS67UBLD 348DSC67 Countertop Model #150
348PDS78UBLD 348DSC78 & 348DSF78 Countertop Model #150 & Floor Model #124
348PDS94UBLD 348DSF94 Floor Model #124
348PDS67LBLD 348DSC67 Countertop Model #196
348PDS78LBLD 348DSC78 & 348DSF78 Countertop Model #196 & Floor Model #189
348PDS94LBLD 348DSF94 Floor Model #189
348PDS67TANK 348DSC67 Countertop Model #215
348PDS78TANK 348DSC78 & 348DSF78 Countertop Model #215 & Floor Model #225
348PDS94TANK 348DSF94 Floor Model #225
348PDSUSPRNG 348DSC67, 348DSC78, 348DSF78, 348DSF94 Countertop Model #156 & Floor Model #108
348PDSLSPRNG 348DSC67, 348DSC78, 348DSF78, 348DSF94 Countertop Model #195 & Floor Model #179
PART NUMBERS
To Previous Page
Loading...