EN - 63
EN
Charging adapter
Device manufacturer’s name or trademark,
business registration number and address
ETA a.s., Náměstí práce 2523, 760 01 Zlín
Device model number ETA251290000
AC adapter manufacturer’s name or
trademark, business registration number
and address
Ten Pao industrial Co., Ltd.
Room 10-11, 6/F., Kwong Sang Hong Cent-
re, 151-153 Hoi Bun Road, Kwun Tong,
Kowloon, Hong Kong
AC adapter model identier S012DBV1900060
Input voltage 100-240 V (AC)
Input frequency 50/60 Hz
Output voltage 19 V (DC)
Output current 0.6 A
Output power 11.4 W
Average eciency in active mode 84.85 %
Low load eciency (10%) 76.32 %
Power consumption without load 0.057 W
Appliance protection class II.
Percentage of nameplate output current
Load condition 1 100 % ± 2 %
Load condition 2 75 % ± 2 %
Load condition 3 50 % ± 2 %
Load condition 4 25 % ± 2 %
Load condition 5 10 % ± 1 %
Load condition 6 0 % (no-load condition)
Charging station
Appliance protection class III.
Input voltage 19 V (DC)
Hereby, ETA a.s. declares that the radio equipment type ETA2512 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: http://eta.cz/declaration-of-conformity
The manufacturer reserves the right to change the technical specications for the
respective model. The manufacturer reserves the right to change/update the ETA SMART
application without prior notice. Due to the character of such changes/updates, some
information or procedures in this manual might become obsolete or might be missing.