eta Aron - ERROR INDICATORS; PROBLEMS SOLUTIONS; TECHNICAL SPECIFICATION

EN - 62
EN
8. ERROR INDICATORS
Acoustic signalling Cause Remedy
1 sound
Wheels or side
brushes do not rotate
Check and clean the wheels and side
brushes
2 sounds
Sensor or front
bumper error
Clean the sensors and check the
functionality of the front bumper
3 sounds
The vacuum cleaner
got stuck
Eliminate the cause of the jam or move
the vacuum cleaner to an empty space
4 sounds Main brush error Check and clean the main brush
9. PROBLEMS SOLUTIONS
Problem Cause Remedy
The vacuum cleaner
rotates in one place.
Left / right wheel is stuck. Check and clean the wheels
The vacuum cleaner is
still backing up.
One of the sensors in the
front bumper is dirty or
damaged.
Clean the front bumper sensors.
If the problem persists, contact
an authorized service centre.
The vacuum cleaner
constantly hits obstacles.
The front bumper is
jammed due to dirt.
Check and clean the front
bumper.
The vacuum cleaner
cleans for a very short
time.
The storage battery is
not charged enough or is
at the end of its life.
Fully charge the vacuum cleaner.
If the problem persists, replace the
storage battery with a new one.
The suction power of
the vacuum cleaner
decreases.
The dustbin is full or the
lters are dirty.
Check and clean the dustbin
and lters.
10. TECHNICAL SPECIFICATION
Robotic vacuum cleaner
Appliance protection class III.
operating voltage 14,4 V (DC)
Accumulator Li-Ion
Battery savings 2400 mAh
Charging time 6 hours
Weight 2.5 kg
Dimensions Ø 312 mm x 72 mm
Frequency range 2.4 GHz
Output power (EIRP) 15.95 dBm
Wireless technology Wi
Declared acoustic level is 72 dB(A) re 1pW.