eta Aron - VACUUM CLEANER MAINTENANCE; CHARGING CONTACTS CLEANING; DIRT TANK AND FILTERS CLEANING

EN - 59
EN
7. VACUUM CLEANER MAINTENANCE
Carry out maintenance and cleaning regularly, depending on the frequency of use and
the amount of cleaning. In a more polluted environment (a pet household), more frequent
maintenance will be required. Failure to carry out maintenance may damage the
vacuum cleaner and its components!
7.1 CHARGING CONTACTS CLEANING
Switch o󰀨 the vacuum cleaner and disconnect the charging station from the power
supply! Clean the charging contacts (A3, D3) on the vacuum cleaner and on the station
with a soft dry cloth. Clean at least once a month. Do not use aggressive cleaning
agents or oils to clean the contacts.
7.2 DIRT TANK AND FILTERS CLEANING
1. Remove the dirt tank B from the vacuum cleaner. Dispose of dirt together with normal
household waste.
2. Clean the dirt tank with the tool I (or other suitable).
3. Remove the lters from the dirt tank and clean them with tool I (or other suitable).
Blow or knock the HEPA lter B3 gently. The foam lter B4 and protection lter B5 can
be rinsed under running water. If the dirt tank becomes dirty, you can also rinse it under
running water. Allow everything to dry thoroughly before reuse!