GB
40
/ 74
VI. CLEANING AND MAINTENANCE
Let the bread maker cool down properly before any maintenance work!
Do not use any aggressive chemicals or solvents for cleaning!
Clean the bread pan and kneading hooks as soon as possible after use. If the hooks are
not easy to remove from the shafts, fill the pan with warm water and leave them to soak
(for about 30 min.). Remove the kneading hooks. Clean the inside of the pan and kneading
hooks with a cloth (sponge) and water with a little detergent. Clean the outside of the pan
with a wet cloth. Never use metal or sharp objects for cleaning! Never immerse the whole
pan in water! It could have a negative impact on the shaft rotation. Clean the bread
maker with a wet cloth. Let all the parts dry properly after maintenance. The surface colour
will change over time which is normal. This change does not affect the surface properties.
Storage
Make sure that the bread maker is cold and dry before storage. Store the bread maker in a
safe and dry place, out of the reach of children and incapacitated persons.
Maintenance of a serious nature or maintenance which requires interference with
the internal parts of the appliance must be carried out by a professional service
centre! By failing to follow the instructions issued by the manufacturer, the right to
the warranty service will be invalidated!
If you are unable to x the problem, or if you need any further information about the
appliance or service centres, please contact your distributor.
VII. TROUBLESHOOTING
Error messages on the display:
Display Problem Solution
H:HH
Temperature inside the bread maker is
too high (over 40C)
Unplug the bread maker from the
mains and let it cool down properly
E:E0 Malfunctioning temperature sensor Contact an authorized service centre
VIII. ENVIRONMENT
If the size of the appliance allows, all the parts contain marking of the materials used
for production packaging, components and accessories as well as for recycling. The
symbols on the product or in the accompanying documentation mean that the electrical
or electronic product used must not be liquidated together with communal waste. To
ensure the appropriate liquidation take the used appliance to a collection point where it
will be accepted free of charge. Correct liquidation of the product helps to protect valuable
natural resources and helps to prevent a potential negative impact on the environment and
human health which can be the outcome of inappropriate liquidation of waste. More details
can be obtained from your local authorities or the closest collection point. Inappropriate
manipulation of such waste can result in a ne according to the national legislation.
IX. TECHNICAL DATA
Voltage (V) shown on the type label of the appliance
Wattage (W) shown on the type label of the appliancel
Weight approx (kg) 4.9
Size of the product (mm) 290 x 420 x 315
To Next Page
Loading...
Need help?
General
