ETC EOS - Page 11

ETC Setup Guide
Eos Rackmount Devices
Eos Rackmount Devices Page 11 of 12 ETC
Importing and Exporting Button Configurations
You may import an RPUbutton configuration file from a USBdevice.
1.
Select {Import} in the RPUarea of the Buttons section of the ECU. The ECU will search for a
valid RPU button file.
2.
If a valid file is found, the ECU will ask if you want to import the settings. Select {Yes} to
import the settings.
3.
Select {OK} to close the window.
You may also export your RPU button configuration to a USB device.
1.
Select {Export}in the RPUarea of the Buttons section of the ECU.
2.
If a USB drive is available, the ECU will ask you to choose the desired drive from the
dropdown menu. Select the desired USB drive.
3.
Select {Accept} to save the button configuration to the USBdrive.
4.
Select {OK} to close the window.