Express Two Scene Preset User Manual, v.3.1 1
Chapter 1
Introduction
This manual covers the installation and operation of lighting systems
containing ETC’s Express 24/48, Express 48/96 and Express 72/144
control consoles operating with version 3.1 system software. The
differences between these consoles is shown under Appendix G
Specifications, page 351. Throughout the manual, all three consoles are
referred to as Express unless a distinction is necessary.
Chapter one includes information to orient you to the console and the
manual. It includes the following sections:
• Using this manual
• Using Help
• Text conventions
• Navigation and visual feedback
• Output level conventions
• Moving light concepts and terms
• The Only command
• Using the trackpad
• Electronic backup maintenance
• Troubleshooting
To Next Page
