Need help?Do you have a question about the ETC Express and is the answer not in the manual?
Seven buttons to control the LPC and the show.
Button to read the show into the LPC.
Connect the LPC to an ETC network for device operation.
Procedure for upgrading the LPC's system software.
Seven buttons to control the LPC and the show.
Button to read the show into the LPC.
Connect the LPC to an ETC network for device operation.
Procedure for upgrading the LPC's system software.
General| Control Protocol | DMX512 |
|---|---|
| Display | LCD |
| Output Channels | 24, 48 |
| DMX Output Ports | 1 |
| DMX Outputs | 1 |
| Submasters | 24 |
| Power Requirements | 100-240V AC, 50/60Hz |
To Next Page