Need help?Do you have a question about the ETC SolarFrame 750 and is the answer not in the manual?
General| Brand | ETC |
|---|---|
| Model | SolarFrame 750 |
| Category | Lighting Equipment |
| Language | English |
Provides essential safety instructions for installation, configuration, and maintenance of the fixture.
Details how to contact ETC Technical Services for assistance and troubleshooting product issues.
Outlines rules for safe and proper operation, installation, and usage of the fixture.
Details the electrical requirements and specifications for the fixture's operation.
Lists power input values, including VAC, Amps, Watts, VA, and Power Factor.
Explains the power input connector type and wire color coding for connections.
Illustrates the pin configuration for DMX XLR connectors used for input and output.
Provides guidelines for connecting DMX data cables between the control source and fixtures.
Explains the use of DMX-512 control alongside Ethernet output for advanced control.
Details the importance and method of terminating DMX signals to prevent data corruption.
Explains how to assign unique DMX starting addresses to ensure correct fixture response to control signals.
Provides information on the DMX channel map for the SolaFrame 750 fixture.
Offers instructions for connecting Ethernet control cables to the fixture.
Describes how Ethernet control can distribute DMX signals through the fixture's DMX Out port.
Sets the universe value for Art-Net and sACN control inputs, ranging from 000-255 or 001-255.
Explains how to navigate and operate the fixture's onboard user interface using the control buttons.
Provides instructions for configuring various operational parameters of the SolaFrame 750 fixture.
Instructions to set the DMX starting address for the fixture via the user interface.
Details how to access and view fixture information such as running time and LED hours.
Displays any current fixture errors and directs to Error Codes section for details.
Allows viewing the DMX values for individual fixture channels.
Displays the current temperature of the fixture head.
Shows the current fan speeds of the fixture in RPM.
Displays the fixture's Ethernet IP address and notes it can be modified in the Set menu.
Displays the software version currently running on the fixture.
Allows configuration of status options like DMX mode, pan/tilt reverse, encoders, and hibernation.
Configures display settings such as shutoff time, flip display, and key lock for the user interface.
Configures the fixture's control input protocol, such as DMX Only, Art-Net, or sACN.
Sets the universe value for Art-Net and sACN control inputs, ranging from 000-255 or 001-255.
Provides access to service settings like Service PIN, RDM UID, IP address, and error log clearing.
Enables selection of fan operating modes: Standard, Studio, or Continuous.
Allows selection of the temperature display scale between Celsius and Fahrenheit.
Option to reset all fixture settings to their original factory defaults.
Resets all mechanical features of the fixture, including pan, tilt, colors, and gobos, to their home positions.
Runs a comprehensive self-test program on the fixture to check all functions.
Allows running a self-test on individual fixture channels.
Enables manual control and setting of individual fixture channels for testing or adjustment.
Allows manual calibration of individual fixture features, requiring a PIN for access.
Explains how to build scenes into programs and assign them to Program Partitions for playback.
Details error conditions related to the Color 1 system, including sensor or motor failures.
Lists error conditions related to the CMY color mixing system, such as sensor or motor malfunctions.
Describes error conditions related to the CTO color temperature system.
Details error conditions related to the focus system, including magnetic-indexing or motor failures.
Lists error conditions related to the frost effect, such as sensor or motor failures.
Details error conditions related to the Gobo 1 wheel, including sensor or motor failures.
Lists error conditions related to the Gobo Rotating Wheel 1.
Describes error conditions related to the pan movement system.
Details error conditions related to the tilt movement system.
Lists error conditions related to the zoom system, including sensor or motor failures.
Provides instructions for cleaning the fixture's lens and fans to maintain optimal performance.
Guides on how to safely replace the internal AC line fuse to prevent overload.
Details the FCC compliance statement and conditions for the SolaFrame 750 device.
Lists standards related to the Low Voltage Directive for luminaires and lamp controlgear.
Lists standards for EMC immunity and radio disturbance characteristics.
References standards for photobiological safety of lamps and lamp systems.
States that the product does not contain specified hazardous substances.
Lists standards related to the Low Voltage Directive for luminaires and lamp controlgear.
Lists standards for EMC immunity and radio disturbance characteristics.
References standards for photobiological safety of lamps and lamp systems.
States that the product does not contain specified hazardous substances.
To Next Page