Need help?Do you have a question about the ETC HIGH END SYSTEMS LONESTAR and is the answer not in the manual?
Provides crucial safety instructions for operating the Lonestar automated framing fixture.
Details critical safety warnings, including hot surfaces, electrical shock, and proper handling.
Outlines proper usage, installation location, and handling procedures for safe operation.
Specifies requirements for safe fixture installation, including environmental conditions and rigging.
Details electrical requirements, including voltage, wattage, and power factor for the fixture.
Specifies the number of fixtures that can be connected per circuit and power source requirements.
Explains the standard 5-pin XLR connector pinout for DMX-512 communication.
Provides instructions for connecting DMX data cables to the fixture for control.
Ensures signal integrity by terminating DMX and sets the starting channel for fixture control.
Information on the DMX channel map for the Lonestar fixture.
Guides on connecting Ethernet cables for control signals using Art-Net or sACN protocols.
How Ethernet control integrates with DMX, including DMX Thru port functionality.
Configure fixture control input (Art-Net/sACN) and set the universe for network control.
Guides on operating the fixture's onboard display and navigation buttons.
Configures DMX address, fixture operational time, and views error history.
Adjusts status options, DMX input, and network universe settings.
Modifies service settings, fan modes, display options, and temperature scale.
Guides on updating fixture firmware via USB and selecting DMX protocols.
Includes procedures for resetting, self-testing, manual control, and re-calibrating fixture features.
Lists and explains error messages related to fixture components and their potential causes.
Provides instructions for cleaning the fixture's lens and fans for optimal performance.
Information on fuse replacement and contacting technical services for assistance.
Provides crucial safety instructions for operating the Lonestar automated framing fixture.
Details critical safety warnings, including hot surfaces, electrical shock, and proper handling.
Outlines proper usage, installation location, and handling procedures for safe operation.
Specifies requirements for safe fixture installation, including environmental conditions and rigging.
Details electrical requirements, including voltage, wattage, and power factor for the fixture.
Specifies the number of fixtures that can be connected per circuit and power source requirements.
Explains the standard 5-pin XLR connector pinout for DMX-512 communication.
Provides instructions for connecting DMX data cables to the fixture for control.
Ensures signal integrity by terminating DMX and sets the starting channel for fixture control.
Information on the DMX channel map for the Lonestar fixture.
Guides on connecting Ethernet cables for control signals using Art-Net or sACN protocols.
How Ethernet control integrates with DMX, including DMX Thru port functionality.
Configure fixture control input (Art-Net/sACN) and set the universe for network control.
Guides on operating the fixture's onboard display and navigation buttons.
Configures DMX address, fixture operational time, and views error history.
Adjusts status options, DMX input, and network universe settings.
Modifies service settings, fan modes, display options, and temperature scale.
Guides on updating fixture firmware via USB and selecting DMX protocols.
Includes procedures for resetting, self-testing, manual control, and re-calibrating fixture features.
Lists and explains error messages related to fixture components and their potential causes.
Provides instructions for cleaning the fixture's lens and fans for optimal performance.
Information on fuse replacement and contacting technical services for assistance.
General| Brand | ETC |
|---|---|
| Model | HIGH END SYSTEMS LONESTAR |
| Category | Lighting Equipment |
| Language | English |
To Next Page
