To Next PageTo Next Page
Need help?Do you have a question about the ETC Studio HD and is the answer not in the manual?
Lists critical safety warnings to follow before operating the fixture.
Details the physical, electrical, LED, optical, and control specifications of the fixture.
Describes the basic assembly and mounting hardware for the fixture.
Explains how to tilt and pan the fixture for aiming.
Outlines requirements for power and DMX data cabling.
Explains how to connect power and DMX cables to the fixture.
Discusses DMX addressing and profile options for fixture control.
Describes DMX compliance, user interface, and control modes.
Critical safety reminder about attaching a safety cable before adjustments.
Discusses fan cooling, operating temperatures, and duty cycle considerations.
Caution regarding fixture shutdown in high temperatures or low airflow.
Specifies AC power requirements and the need for non-dimmable circuits.
Warning about connecting to a dimmable power source.
Explains DMX control, connectors, and data run limitations.
Specific instructions for connecting AC power and DMX cables.
Rules for setting DMX addresses and line loading practices.
Explains the DMX channel occupancy and function for different profiles.
Details DMX profiles like Direct, RGB, HSI, HSIC, Studio.
Critical safety warning for accessory installation.
Provides an overview of the LCD and keypad for fixture control.
Explains how to navigate through screens and menus using keypad buttons.
Explains the consistent navigation structure from the user interface.
Details information displayed on the respective home (status) screens.
Provides access to various fixture settings and specific operations.
Lists and describes error messages displayed on the home screen.
Instructions for setting the DMX start address of the fixture.
Explains how to select predefined fixture performance settings.
Screen for customizing DMX start address, profile, strobe, data loss, and Plus Seven.
Options for balancing brightness and output consistency.
Explains how one fixture controls others in a linked chain.
Displays current DMX input values by channel.
Select each LED series and adjust its intensity individually.
Caution against recalibrating without technician instruction.
Caution about turning off status indicators and losing critical information.
Instructions for connecting power and DMX cables.
Warning regarding non-dimmable power source connection.
Steps to set the DMX address for the fixture.
Select color and intensity from a predefined menu without DMX.
Explains how to select quick setups for most fixture types.
Lists critical safety warnings to follow before operating the fixture.
Details the physical, electrical, LED, optical, and control specifications of the fixture.
Describes the basic assembly and mounting hardware for the fixture.
Explains how to tilt and pan the fixture for aiming.
Outlines requirements for power and DMX data cabling.
Explains how to connect power and DMX cables to the fixture.
Discusses DMX addressing and profile options for fixture control.
Describes DMX compliance, user interface, and control modes.
Critical safety reminder about attaching a safety cable before adjustments.
Discusses fan cooling, operating temperatures, and duty cycle considerations.
Caution regarding fixture shutdown in high temperatures or low airflow.
Specifies AC power requirements and the need for non-dimmable circuits.
Warning about connecting to a dimmable power source.
Explains DMX control, connectors, and data run limitations.
Specific instructions for connecting AC power and DMX cables.
Rules for setting DMX addresses and line loading practices.
Explains the DMX channel occupancy and function for different profiles.
Details DMX profiles like Direct, RGB, HSI, HSIC, Studio.
Critical safety warning for accessory installation.
Provides an overview of the LCD and keypad for fixture control.
Explains how to navigate through screens and menus using keypad buttons.
Explains the consistent navigation structure from the user interface.
Details information displayed on the respective home (status) screens.
Provides access to various fixture settings and specific operations.
Lists and describes error messages displayed on the home screen.
Instructions for setting the DMX start address of the fixture.
Explains how to select predefined fixture performance settings.
Screen for customizing DMX start address, profile, strobe, data loss, and Plus Seven.
Options for balancing brightness and output consistency.
Explains how one fixture controls others in a linked chain.
Displays current DMX input values by channel.
Select each LED series and adjust its intensity individually.
Caution against recalibrating without technician instruction.
Caution about turning off status indicators and losing critical information.
Instructions for connecting power and DMX cables.
Warning regarding non-dimmable power source connection.
Steps to set the DMX address for the fixture.
Select color and intensity from a predefined menu without DMX.
Explains how to select quick setups for most fixture types.
General| Brand | ETC |
|---|---|
| Model | Studio HD |
| Category | Lighting Equipment |
| Language | English |
