ETC Studio HD - Sequences Menu and Quick Color Menu

B Menu Flow Chart 89
Sequences Menu and Quick Color Menu
Note:
The Quick Color Menu is not available in Daylight or Tungsten Fixtures
If Preset is
set to ‘0’
Sequences
Sequence: *3
Action: Not Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture
Sequences
Sequence: *3
Action: Not Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture
Sequences
Sequence: * 3
Action: Not Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture
Sequences
Sequence: * 3
Action: Not Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 0 0:02
Copy to Other Fixture
Sequences
Sequence: * 3
Status: Active
Rate: 100%
Step: 01
Preset: 0
End State: Loop
Copy to Other Fixture
Sequences
Sequence: * 3
Status: Active
Rate: 100%
Step: 01
Preset: 0
End State: Loop
Copy to Other Fixture
Presets and Sequences
Focus: Off
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active
Sequences
Sequence: *3
Action: Not Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture
Sequences
Sequence: *3
Action: Not Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture
Copy Sequence
This Will Copy
Preset Data
From This Fixture to
All other Fixtures
Are You Sure?
Yes
No
Presets and Sequences
Focus: Off
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active
Quick Color
Intensity: 0%
Color: LIT BLUE
Press the Light Bulb button
for immediate access to
the Quick Color menu.
The Quick Color menu is not available on
Daylight or Tungsten xtures.