Need help?Do you have a question about the ETC Source 4WRD and is the answer not in the manual?
General| Input Voltage | 100-240VAC |
|---|---|
| Frequency | 50/60 Hz |
| Light Source | LED |
| Type | LED Retrofit Engine |
| Lumen Output | 6000 lumens |
| Dimming | DMX or Line Voltage Dimming |
| CRI | 90+ |
| Fixture Type | Source Four |
| Beam Angle | Dependent on lens tube used |
| Compatibility | Source Four fixtures with 750W lamp housing |
| Life Expectancy | 50, 000 hours |
| Control Protocol | DMX512 |
Instructions for wiring the power connector, including wire color codes for Line, Neutral, and Ground.
Instructions for installing the Source 4WRD LED retrofit kit into a compatible luminaire.
Procedure for attaching the C-clamp and safety cable for fixture mounting and positioning.
To Next Page