ETC Source 4WRD - Introduction

Source 4WRD Installation and User Manual 1
Introduction
The Source 4WRDLED is a replacement for a standard Source Four
burner assembly. It converts the HPL source to a white-light LED and
provides a significant reduction in power consumption.
Source 4WRD
LED retrofit kit,
shown installed
on a Source Four
fixture body
The following Source 4WRD options are available in 80 CRI, 90 CRI
(Gallery), and 90 CRI Daylight (Gallery) variants:
•
Source 4WRDLED retrofit kit: Used to modify an existing Source
Four HPL incandescent fixture to a white LED fixture. The Source
4WRDLED can also be used with the Source 4WRD PAR or
PARNel Fixture Body to create a Source 4WRD PAR or PARNel
fixture. For more information, visit etcconnect.com.
•
Source 4WRD Light Engine: Combines the Source Four
incandescent fixture body with the Source 4WRDLED. Available
only with 80 CRI and 90 CRI (Gallery) variants.
Note: The Source 4WRDLED retrofit kit is not compatible with
Source Four LED, Fresnel, PAR, or jr fixtures.