ETC HIGH END SYSTEMS SolaPix 37 - Flex Module Configuration

18 SolaPix 37 User Manual
Navigate:Main Menu → Address → Flex Module
The Flex module is an optional feature. Select Disable in the Mode menu to turn off the module.
Settings Value Description
Mode
•
Independent
•
Compound
•
Disable
Select how the Flex module is implemented:
•
Compound - the module inherits its settings from
the Base module. See the Source , Address , and
Universe settings for details.
•
Independent - the addressing and control of the
module are independent of the other modules.
•
Disable - the module is off.
The default mode is Compound.
Source
•
DMX
•
Art-Net
•
sACN
Select the control source for the Flex module.
Note: This option is only available when the Mode
selection is set to Independent. When you set the
module to Compound mode, the Source is inherited
from the Base module.
Address 001-xxx
Set the DMX address for the Flex module.
Note: This option is only available when the Mode
selection is set to Independent. When you set the
module to Compound mode, the Address is inherited
from the Base module Address (Base module
Address+21).
Universe 000-255
When using Art-Net or sACN control source, set the
universe.
Note: This option is only available when the Mode
selection is set to Independent. When you set the
module to Compound mode, the Universe setting is
inherited from the Base module.