-2-
u Please don’t measure in an inflammable place. The flame
sparkle maybe cause explosion.
u During usage of tester, please stop using it when exposed
metal is caused by broken enclosure or testing wires.
u Please don’t keep or store the tester in the spot with
high-temperature and moisture, or condensation, and under
direct daylight radiation for a long time.
u For replacing battery, please confirm testing wire has moved
apart the meter, and FUNCTION rotary switch is in “OFF”
position.
u Please put the used batteries in appointed collection place.
u The Tester has no auto shut-off function. Please set
FUNCTION rotary switch to “OFF” after usage.
u When the meter displays battery low voltage symbol ，and
you need to replace the battery in time.
u If the Tester is not going to be used for a long period, remove
the battery.
u Pay attention to measuring range and usage environment
stipulated for the Tester.
u This measuring device is only to be used, disassembled,
adjusted and repaired by qualified personnel with authorization.
u When it may cause hazard by continuous use for the reason
of the Tester itself, it shall immediately stop using it and deposit it
at once, leaving it for disposal by authorized agency.
u For risk of danger icon in manual , users must perform
safety operations strictly in compliance with the manual content.
To Next Page
Loading...
