Etel DSC Series Hardware Manual

ETEL Doc.- Hardware Manual # DSCDP / Ver G / 6/1/11
DSCDP Hardware Manual 5
Record of revisions concerning the DSCDP manual:
Documentation concerning the DSCDP:
• DSCDP Hardware Manual (Specifications & electrical interfaces) # DSCDP 904 G
• Operation & Software Manual (DSCDP's setup, use & programming) # DSC2P 903 x
• DSO-PWS User's Manual (Power module installation and specifications) # DSOPWS 902 x
• DSO-RAC2 Hardware Manual (DSO-RAC2 principle) # DSORAC2 904 x
• EBL2 Communication Manual (EBL2 principle, messages mapping) # EBL2 908 x
Remark: By default, the DSCDP is delivered without UL recognition.
Document revisions
Issue (x) Date Modified
Ver A 05.06.02 First version
Ver B 24.09.03
Updated version
- New housed format (see §2.2
and §3.5)
- Brake resistor as well as power stage and short-circuit relays on housed model (see §3.5.2
,
§3.5.3
and §3.5.4)
- New signals on JC4 connector (§3.3.4
)
- Additional safety precautions in accordance with the UL and CE standards
Ver C 19.12.03
Updated version
- Housed format is UL certified
Ver D 31.03.04
Updated version
- Housed format dimensions modified (see §2.2.1
)
Ver E 01.11.04
Updated version
-Digital Hall effect sensor implemented (see §3.2.1.1
)
Ver F 19.12.05
Updated version
- Additional detailed descriptions
Ver G 06.01.11
Updated version:
- New UL certification laboratory (TUV)
The DSCDP position controllers have been successfully tested and evaluated to
meet the UL 508C for US market and CSA-C22.2 N°14-05 for canadian market.
This standard describes the fulfillment by design of minimum requirements for
electrically operated power conversion equipment which is intended to eliminate the
risk of fire, electrical shock, or injury to persons being caused by such equipment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Etel DSC Series Specifications

General

Brand	Etel
Model	DSC Series
Category	Controller
Language	English