ETHINK KL8800A User Manual

KL8800A User Manual
www.ethink
-
spa.com
1
Ⅰ. Overview of the Panels
AUX
Fig . 1: A8=OFF 7 keys single color back lighting control panel- Installation sketch(156*72mm)
AUX
Fig . 2: A8=OFF 8 keys single color back lighting control panel- Installation sketch(183*66mm)
O3
AUX
1
2
1
3
2
4
AUX
Fig . 3: A8=ON 8 keys double color back lighting control panel- Installation sketch(230*90mm)

ETHINK KL8800A Specifications

General

Brand	ETHINK
Model	KL8800A
Category	Spa Accessories
Language	English

Summary

Overview of the Panels

Function Summary

Function Instructions

Temperature Control

Controls the SPA water temperature between 77-104°F (25-40°C) using up/down keys.

Operation of the 'M' Key

Navigates through various settings like real-time clock, filter cycle, and brightness.

Working Mode

Clock Setting

Pre-settings for Filter Anti-Virus Cycle

Temperature Fine Tuning

Light Brightness Adjustment

Main Board Specifications and DIP Jumper Settings

Operation Instruction of Output Loads

Operation of Surfing Pump

Controls surfing pumps 1/2/3 ON/OFF and dual-speed operation for pump 1.

Operation of the Blower

Turns the blower ON/OFF; it automatically shuts off after 15 minutes.

Operation of the Light

Controls LED light ON/OFF, color change, and fixed color modes.

Operation of AUX or Key

Mandatory Drainage and Automatic Replenishing Water

System Malfunction Warning

Other Operation Information

Provides explanations for system status codes like ICE, INF, INP, and OUT.

Electrical Parameters

Performance Index

Details working voltage, current, dielectric strength, insulation, and protection levels.

Maximum Output Load Index

Lists the maximum load ratings for heater, pumps, blower, and other components.

Installation Sketch