What to do if my ETQ Portable Generator runs but has no electrical output?
If your ETQ Portable Generator's engine runs but there's no electrical output, try these steps: 1. Wait two minutes, then push the circuit reset button to the "on" position. 2. If you're using an extension cord, try a different one. 3. Connect a different electrical device to rule out a problem with the original device.
Why ETQ Portable Generator runs but does not support all electrical devices connected?
If your ETQ Portable Generator runs but can't support all connected devices, it might be overloaded. Try connecting fewer devices. Also, a short in one of the connected devices could be the issue, so try disconnecting any faulty or short-circuited electrical loads. Finally, a dirty air cleaner can cause this problem, so clean or replace it.
General| Type | Portable Generator |
|---|---|
| Fuel Type | Gasoline |
| Peak Wattage | 6000 W |
| Max AC Output | 6000W |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Engine Type | 4-stroke, OHV |
| Starting System | Recoil |
| Outlet Types | (2) 120V 20A Outlets, (1) 120/240V 30A Twist Lock Outlet |
To Next Page
