Why won't my ETQ DG6LE start?
- CCameron MorenoJul 30, 2025
Your ETQ Portable Generator might not start for several reasons. Ensure there's enough fuel and the fuel switch is in the 'OPEN' position. Check that the speed control lever is in the 'RUN' position and the lubricating oil level is between the 'H' and 'L' marks. Also, the nozzle might be dirty and needs cleaning, or the accumulator may lack electricity and need charging or replacement. Make sure to start the diesel engine according to the start operation procedures. If the high-pressure pump and nozzle aren't injecting fuel properly, disassemble the nozzle and adjust it at the test table.