06
Note:
Brief Operating Instructions
Cleaning And Maintenance
If your refrigerator enters Battery Protection mode too quickly, it is likely that your power supply
voltage is insufficient and the low-voltage protection value is set too high. Or your DC power
supply wiring is not suitable and cannot provide enough current. Check whether the power supply
wiring is suitable and consider appropriately lowering the battery-protection setting.
In order to ensure that the car can start normally, it is recommended to set the protection
level at "V=" when using the refrigerator in the car.
Before cleaning your refrigerator, disconnect the power supply. Wipe the inner and outer
surfaces of the refrigerator with a soft cloth dampened with a small amount of plain water
or soapy water. Never wash the refrigerator by immersing it in water or pouring water over it
because this will damage the electrical components.
When you will not be using the refrigerator for a long time, clean the inside and outside of the
refrigerator and dry it well. Take measures to keep the appliance away from any moisture or dust
to prevent mildew growth and foul smells from forming inside the refrigerator.
To Next Page
Loading...
