EasyManua.ls Logo

Euhomy IM-10S - User Manual

Euhomy IM-10S
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Email: support@euhomy.com
Facebook: @Euhomy.Official
ICE MAKER
SKU: IM-10S
Instruction Manual

Questions and Answers

  • J
    julie09Aug 7, 2025
    What to do if my Euhomy Ice Maker is leaking water?
    • L
      lewiswyattAug 7, 2025
      If your Euhomy Ice Maker is leaking water, ensure the drainage pipe bracket is correctly plugged into the water drain. If the water pipe connector inside the machine is not installed, contact professional after-sales service personnel for maintenance.
  • S
    Sarah ChurchAug 13, 2025
    What to do if the 'Add Water' light is on my Euhomy IM-10S?
    • R
      Randy HoodAug 13, 2025
      If the 'Add Water' indicator is lit on your Euhomy Ice Maker, first add water to the unit. If the issue persists, power off the ice maker and restart it after 2 minutes. If the problem continues, contact support@euhomy.com.
  • J
    John LewisAug 19, 2025
    How to fix the 'Ice Full' indicator on my Euhomy Ice Maker?
    • J
      Jon SavageAug 19, 2025
      If the 'Ice Full' indicator is lit on your Euhomy Ice Maker, remove the ice cubes from the ice maker. If the light remains on, clean the sensor probe. For a bad ice full sensor, please contact support@euhomy.com.
  • H
    Heather BrownAug 26, 2025
    What to do if my Euhomy IM-10S Ice Maker has no power?
    • E
      epowersAug 26, 2025
      If your Euhomy Ice Maker isn't powering on, start by checking the local power supply. Ensure the power cord is properly connected and not damaged. If the cord is damaged, contact support@euhomy.com.
  • C
    Chloe LopezAug 31, 2025
    Why is my Euhomy Ice Maker making ice so slowly?
    • D
      dcarsonAug 31, 2025
      If your Euhomy Ice Maker is making ice too slowly or not at all, ensure the air temperature is below 90 °F and that the water temperature in the inner tank is also suitable. For refrigeration pipe blockage or a refrigerant leak, please contact support@euhomy.com.

Summary

Welcome and Congratulations

Frequently Asked Questions

Cleaning Frequency

Guidance on how often to clean the ice maker based on usage habits to prevent scale accumulation.

Cleaning Procedure

Recommended method for cleaning the ice maker using lemon water or vinegar solution and rinsing.

Cloudy Ice Cubes Cause

Explanation for cloudy ice cubes, suggesting quality water and filtration systems.

Using Other Liquids for Ice

Discourages using milk or juice due to potential pump blockage and calcification issues.

Ice Melting Quickly

Reasons for ice melting quickly, like high ambient temperatures, and solutions like closing the lid.

Sticking Ice Cubes

Addresses ice cubes sticking together, suggesting temperature adjustments or evaporator checks.

Plastic Smell in Ice

Troubleshooting steps for plastic smell, including cleaning with lemon water and rinsing.

Machine Noise Troubleshooting

Explains machine noise and suggests solutions like closing the lid or checking the filter.

Water Leaks

Troubleshooting water leaks, potentially due to internal tubes becoming detached during transport.

No Ice Production

Diagnoses no ice production despite water flow, suggesting refrigerant leak as a cause.

Small Ice Production

Addresses small ice production, citing high ambient/water temperatures or evaporator deformation.

Safety Precautions

General Safety Instructions

Highlights the importance of safety and reading all messages provided in the manual and on the appliance.

Electrical Safety and Usage

Covers electrical safety, grounding, extension cord use, supervision, and cleaning precautions.

Grounding and Stability

Emphasizes the need for proper grounding and placing the appliance on a flat, stable surface.

Unit Construction

Ice Maker Structure Diagram

Diagram illustrating the main parts and components of the ice maker unit.

Component Attention Points

Notes regarding air outlet, water tray, drainage bracket, and sewage discharge during cleaning.

Operation and Display Areas

Details the control panel, indicators (Making Ice, Ice Full, Add Water), and buttons (Light, Clean, Power).

Operation and Maintenance

How to Start the Unit

Step-by-step guide for starting the ice maker, including water refill modes and initial setup.

Water Indicator and Standby

Explains the lack of water indicator, manual water addition, and machine standby behavior.

Ice Full Indicator

Describes the ice full indicator, stopping production, and how to resume ice making.

Maintaining Your Ice Maker

Recommendations for cleaning before first use, discarding initial ice, and instructions for opening/closing the drawer.

Cleaning Notes and Storage

Advises against harsh cleaning agents and recommends drying the unit before long-term storage.

Correct Product Disposal

Information on proper disposal of the unit and its materials according to national regulations.

Technical Parameters

Warranty Information

Limited 1-Year Warranty Terms

Details the limited 1-year warranty, exclusions, coverage for repair/replacement, and proof of purchase requirements.

Troubleshooting Guide

No Power or Response

Troubleshooting steps for when the ice maker is not powered on or does not respond.

Add Water Indicator

Solutions for the 'Add Water' indicator, including checking water level and pump.

Ice Full Indicator

Troubleshooting when the 'Ice Full' indicator is lit, suggesting removing ice cubes.

Water Leakage Issues

Addresses water leakage problems, such as drainage pipe bracket or water pipe connector issues.

Slow or No Ice Formation

Diagnoses slow or no ice formation, considering air temperature, water temperature, and refrigerant issues.

Euhomy IM-10S Specifications

General IconGeneral
TypeCountertop Ice Maker
Ice Production Capacity26 lbs per day
Ice Storage Capacity1.5 lbs
Ice ShapeBullet
Water Reservoir Capacity2.2 liters
Power Consumption120W
Voltage110V
Cycle Time6-8 minutes
Water Tank Capacity2.2 liters
Ice SizeSmall and Large
MaterialPlastic

Related product manuals