What to do if ice cubes are too thick and won't drop down in my Euhomy Ice Maker?
If the ice cubes in your Euhomy Ice Maker are too thick and won't drop, the ice making cycle might be too long. Press the button to reduce the ice making time.
What does E2 mean on Euhomy Ice Maker?
If your Euhomy Ice Maker displays the code < E2 >, it indicates a faulty refrigerating tube sensor. The unit will still work, but the sensor should be replaced promptly.
What does E1 mean on Euhomy Ice Maker?
If your Euhomy Ice Maker displays the code < E1 >, it indicates a faulty ambient temperature sensor. The unit will still work, but the sensor should be replaced promptly.
What does it mean when Euhomy Ice Maker shows < > but the water tank is full?
If the water tank of your Euhomy Ice Maker contains water but < > is still displayed, it indicates a faulty inlet solenoid valve. Contact a technical service person for repair.
What to do if my Euhomy IM-F displays < >?
If your Euhomy Ice Maker displays < >, it means there is a lack of water. Turn off the unit, add water to the mark, and then restart the unit.
What to do if my Euhomy Ice Maker shows < > code?
If your Euhomy Ice Maker displays the code < >, it indicates that there is too much ice in the basket. Remove some ice cubes from the basket.
What does mean on my Euhomy IM-F Ice Maker display?
The error code on your Euhomy Ice Maker signifies a refrigerating tube sensor breakdown. The unit can still operate, but you should replace the sensor.
What does mean on my Euhomy IM-F Ice Maker?
If you see the error code on your Euhomy Ice Maker, it indicates an ambient temperature sensor breakdown. The unit can still function, but consider replacing the sensor.
What to do if the Euhomy IM-F Ice Maker water reservoir has water, but is still on?
If your Euhomy Ice Maker's water reservoir is full, but the light remains on, the inlet solenoid valve may have broken down, requiring maintenance by a qualified technician.
Why is my Euhomy IM-F Ice Maker working but not making ice?
Your Euhomy Ice Maker might not be producing ice for a few reasons: the ambient or water temperature is too high (move the unit to a place where the ambient temperature is lower than 30°C (86°F) and fill with cool water); there's a refrigerant system leakage, or a refrigerant system block, both of which require a qualified technician to fix.
Guidance on how often to clean the ice maker to prevent scale and ensure proper function.
Recommended cleaning agents and procedures for maintaining the ice maker's hygiene.
Explanation for cloudy ice cubes and solutions involving water quality.
Information on why milk or juice should not be used for ice making.
Reasons for ice melting quickly and tips to slow down the process.
Troubleshooting thick ice or difficulty in ice release from the tray.
How to address a plastic smell in ice cubes through cleaning.
Causes of noise during operation and methods to reduce it.
Identifying and fixing potential water leaks from the machine.
Diagnosing issues when the machine runs but does not produce ice.
Essential safety tips for operating the ice maker to prevent hazards.
Specific risks associated with flammable refrigerant and necessary precautions.
Details the components of the ice maker and their identification.
Explains the functions of the control panel buttons and display indicators.
Instructions for removing packaging and checking components before setup.
Guidance on proper electrical connection, grounding, and outlet requirements.
Instructions on how to add water to the reservoir and important notes on water level.
Information on ice making duration, adjusting thickness, and using timer functions.
Steps for draining the unit and advice on water exchange frequency.
Comprehensive guide on cleaning the ice maker's interior, exterior, and specific parts.
Lists key technical specifications like model, power, current, refrigerant, and weight.
Visual representation of the ice maker's electrical components and connections.
Details the limited 1-year warranty, exclusions, and service procedures.
Solutions for when the unit indicates lack of water or the ice basket is too full.
Addresses issues related to ambient/refrigerating sensors and blocked water pathways.
Troubleshooting thick, thin, or no ice cubes due to temperature or cycle settings.
Troubleshooting refrigerant system issues causing no ice production.
General| Ice Storage Capacity | 1.5 lbs |
|---|---|
| Ice Type | Bullet |
| Ice Production Capacity | 26 lbs per day |
| Water Reservoir Capacity | 2.2 liters |
| Water Tank Capacity | 2.2 liters |
| Voltage | 110V |
To Next Page
