Eumig MARK 607D - How to operate your projector in a nutshell; Plug in and check power; Prepare reel arm and place film reel; Initiate auto threading

(eumig
MARK610D
MARK607D
DUAL B SILENT PROJECTOR
.'
1---,,1'-- Film-format selector
Zoom ring
Focusing knob
Pilot light (Mark 610 OJ
How to operate your projector in a nutshell
o Plug in the projector. But first check e Move the function sWitch to the
the line (mains)
voltage and auto threading position.
frequency.
e Feed the film end into the threading
f) Swing up the reel arm. Place the slot until it is caught by the
full reel (with
super8 or single 8 film) threading mechanism. The threading
on the reel spindle and flip
over the meohanism will do the rest.
reel guard. (For regular 8 film, turn
0 Move the function switch to the
to page 5.) forward with lamp position.
Place the universal film reel supplied
on the takeup-reel spindle.
L--.. ---"