Movie sound from a cassette recorder
by
using a sync cable
(Mark
610
D)
The
tripping
contact incorporated
in
the Eumig
Mark
610 D makes
it
po,ssible
to
start
and stop a cassette
recorder
simultaneously
with
the projector.
However,
it
can be used
only
with re,corders havi,ng a remote-control jack.
The recorder will start when the
projector's
function switch is moved into
the
0
forward
with lamp and start position
«)
which oloses the
tripping
contact.
In
all
other
function-switch positions the
tripping
contact is open and the
recorder
turned off.
Sync cable
(Mark
610
D)
A connecting cable that fits most makes
of
cassette recorders is avai,lable from
your
dealer
as
an
accessory (Eumig
Ordering
No. 790,0267/5).
It
terminates
j'n
a sub-
miniature plug and comes
with
an
adapter
for
Philips-type DIN jacks.
Instructions
for
its use accompany the cable.
8
To Next Page
Loading...
