Need help?Do you have a question about the Eumig MINI 3 SERVOFOCUS and is the answer not in the manual?
Film specifications: type, length, sensitivity settings.
EUMIG Panorama Viennon lens and superwide attachment details.
Automatic light adjustment upon filter insertion.
Parallax-free viewfinder, diopter adjustment, indicator signals.
Automatic exposure control with diaphragm override.
Film counter function: returns to zero.
Frame rates: 18 f.p.s., single frame, continuous run.
Battery types: alkali penlight or NiCd accumulators.
List of supplied camera accessories.
List of optional accessories.
Focusing adjustment using Eumig collimator.
Device for calibrating lightmeter aperture control.
Cartridge for focusing mechanism.
Specific cartridge for 506 V4 unit.
Instrument for 506 V4 system.
Mirror holding component for optical path.
Matte surface screen for optical systems.
Optical instrument for precise focus adjustments.
Adapter for camera battery connection.
Tool for making specific adjustments.
Holder for 511 W2 component.
Component for creating specific gap or distance.
Eccentric part for focusing mechanism fine-tuning.
Fork part for securing BZ clips.
Gauge for correct film guide mechanism setting.
Ring for setting collimator tolerance limits.
Screwdriver for tight or angled spaces.
Replacement lamp for 506 V4 device.
Component for battery status indication.
Activates camera shutter release mechanism.
Detects end of film roll.
Component for measuring light levels.
Powers film transport and other functions.
Specific switch for PMA system.
Primary power on/off switch.
Transport indicator and take-up spring adjustments.
Mechanism plate assembly procedures.
Lens system assembly procedures.
Lens system adjustment procedures.
Circuit board wire soldering procedures.
Indication plate mounting procedures.
Film guide, claw, and side pressure adjustments.
Removal of release slider and related components.
Release slider mechanism assembly.
Single shot lever and micro switch adjustment.
Motor speed and power consumption adjustment.
Adjustment of contact springs for feeler positions.
Filter lever and conversion filter assembly.
Reverse lens and fixing ring insertion.
Reverse lens distance and viewfinder focus adjustment.
Mirror Holder 2 assembly and adjustment.
Mirror Holder 515 2704/2 assembly and adjustment.
Lightmeter installation and securing.
Lightmeter axial position and diaphragm adjustments.
Battery control circuit calibration.
Lightmeter calibration using device and DIN values.
Setting mirror and tolerance ring adjustment.
Focus adjustment data for f9 and f30.
Warning: tele/wide-angle adjustments influence each other.
General| Frame rates | 18 fps |
|---|---|
| Exposure | Automatic exposure control |
| Remote control socket | Yes |
| Batteries | 4x AA batteries |
| Type | Super 8mm |
| ASA film speed settings | 25, 40, 64, 100, 160 ASA |
| Focusing | Servo focus with manual override |
| Weight | Approx. 900g |
To Next Page